Tool List - Installation and Repair

In order to install our device on a wind machine, you will need the following tools:

Category	Item	Source
Altrac Equipment	Wind Machine Station	Altrac
Altrac Equipment	Temperature Probe	Altrac
Altrac Equipment	Directional Antenna	Altrac
Altrac Equipment	Engine Wiring Harness	Altrac
Device Mounting	Impact Driver/Drill
Device Mounting	Metric socket set for drill
Device Mounting	Drill Bits and Drivers
Device Mounting	Ladder
Device Mounting	Body Harness
Wiring Harness Installation	Philips Screwdriver - Medium
Wiring Harness Installation	Philips Screwdriver - Large
Wiring Harness Installation	Flathead Screwdriver - Large
Wiring Harness Installation	Nippers (flush cutters)
Wiring Harness Installation	Magnetic Bolt Retriever
Wiring Harness Installation	Wire Strippers
Wiring Harness Installation	Channel Locks
Wiring Harness Installation	Electrical Tape
Wiring Harness Installation	4" Zip Ties
Wiring Harness Installation	12" Zip Ties
Wiring Harness Installation	18" Zip Ties
Wiring Harness Installation	Adjustable Cresent Wrench
Wiring Harness Installation	Socket drivers (OR ground nut)
Wiring Harness Installation	Rings, butts, quickconnects	Altrac
Wiring Harness Installation	TE Crimper	Altrac
Wiring Harness Installation	Deutsch Tool	Altrac
Wiring Harness Installation	Deutsch Crimper	Altrac
Wiring Harness Installation	Deutsch Pins	Altrac
Wiring Harness Installation	Shop towels
Wiring Harness Installation	Multimeter

When Repairing our device, you may need these items:

Item	Part Number	Use	Source
Automotive Fuses (assorted)	ATC Series	Wind Machine	Hardware Store
Screws for Orchard Rite Switch	TBD	Wind Machine
HOA Switch for Gauge Panel	TBD	Wind Machine
Deutsch Crimper	DT Series	Altrac ST100	Altrac
Deutsch Connector Kit (Connectors, Pins, Plugs)	DT Series	Altrac ST100	Altrac
LiPo Batteries	PW100	Altrac ST100	Altrac
Directional Antenna	CN102	Altrac ST100	Altrac