Neil Schultz

  • Total activity 168
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 119

Activity overview

Latest activity by Neil Schultz
  • Neil Schultz created an article,

    Installation Instructions WH124: Vamco Ford 6.8L V8, Dynagen 600 Series

    Manufacturer: Vamco Engine: Ford 6.8L, V8 Autostart: Dynagen ToughSeries Pro TE600 Altrac Wiring Harness: WH124   Step 1: Ground Black Wire -> Engine Battery Ground Attached the black wire from th...

  • Neil Schultz created an article,

    RPM Calibration - Altrac Wind Machine Station (ST100)

    For instructions, view the video below:

  • Neil Schultz created an article,

    Brochures

    Please find brochures attached below. 

  • Neil Schultz created an article,

    User Manual

    Tools: Phillips Screwdriver Flathead Screwdriver 5/16" Nut Driver - #32 Hose Clamps 7/16" Open End Wrench - Davis Weather Station U-bolts   Step 1: Check Cellular Station Connectivity Plug in the ...

  • Neil Schultz created an article,

    Orchard Rite Autostart Fault Codes

    Orchard Rite Autostart Error Messages  Error Messages E-H2O -coolant temp too high err E-OIL-oil psi too low err E-PUL-Failed to receive a engine rotating pulse err (failed to start) E-RUN – comple...

  • Neil Schultz created an article,

    Product Overview

    Weather Stations give our customers the ability to manage their wind machine with increased precision. They will be able to view temperature inversions, turn off machines during high wind, and keep...

  • Neil Schultz created an article,

    Davis Weather Station Overview

    Davis Weather Stations Davis sells prosumer grade weather stations that are relatively inexpensive ($500-$1000) but reliable enough to last 3-5 years. The ST100 Altrac Station can connect with any ...

  • Neil Schultz created an article,

    Deutsch/Amphenol Connectors and Crimping

    Altrac uses 12, 6, and 3 pin Deutsch/Amphenol connectors. You'll find these on many of our harnesses, especially in the wind machine product segment.    Connectors     Crimping Tool Setup Contact ...

  • Neil Schultz created an article,

    User Manual

    This document gives step by step instructions on how to install your Altrac MultiStation (ST160/161) for valve control and pressure monitoring.    Tools and Materials Size Use Phillips Screwdr...

  • Neil Schultz created an article,

    Spec Sheet

    Attached is a spec sheet outlining the ST160 hardware.