How do I install a temperature sensor on my ST100 Wind Machine Station?
At the end of the control line, which is connected to the ST100, you will see a small black connector. The temperature probe has the mating connector on its end. Simply plug in the temperature probe and wait for your ST100 to update (or click reset inside the enclosure).
Do I need to calibrate my temperature sensor?
Each temperature probe (SN100) we sell is calibrated in the factory to +-.9*F. Since the probe is a digital temperature probe, you do not need to calibrate the probe as you would with an analog temperature probe.
How long is the temperature sensor (SN100)?
Standard length of our temperature sensors is 50 feet.
Can I lengthen my temperature sensor (SN100)?
You can lengthen your temperature sensor, but you might see missed readings if you extend it past 75 feet. 50 feet is the recommended length.